Cost Guides

Plasterboard Sizes and Thicknesses and What a Sheet Costs

Standard plasterboard sheet sizes, what 9.5mm, 12.5mm and 15mm are used for, what a sheet weighs, typical 2026 prices per sheet and fitted, and how to read the board line on a quote.

A stack of plasterboard sheets leaning on a wall beside a tape measure and set square.

The standard UK sheet of plasterboard is 2400mm by 1200mm, which covers 2.88 square metres of wall or ceiling. The three common thicknesses you will see on a quote are 9.5mm, 12.5mm and 15mm. For most domestic walls and ceilings, 12.5mm is the usual choice.

What size is a standard sheet of plasterboard

When you hire a plasterer to line a room, they price the job based on the area in square metres. The most familiar sheet size used to cover that area is 2400mm by 1200mm. One of these standard sheets covers exactly 2.88 square metres of space.

The sheet size matters mostly to the plasterer, who orders boards to suit your rooms, but it helps to know it when you check the materials line on a quote.

Other sheet sizes exist for specific spaces and tight access limits. These include 1800mm by 900mm, 2400mm by 900mm, 2700mm by 1200mm and 3000mm by 1200mm. Availability for these alternative sizes varies, so a local builders merchant might not hold them in stock. Ask the plasterer which size they plan to use and why.

Which thickness goes where

Plasterboard comes in several thicknesses, but 9.5mm, 12.5mm and 15mm are the most common UK thicknesses. Anything measuring 19mm and above is a specialist product used mainly in commercial work, flooring and multi-layer systems.

The thinnest standard board is 9.5mm. Plasterers suggest this thickness for selected ceilings, light partition linings and curved work where a specific board is made to bend. It is also common for overboarding, which means fixing new plasterboard directly under an existing ceiling.

The baseline for general internal walls and ceilings is 12.5mm standard board. This is the usual choice for domestic walls, overboarding walls and bonding to suitable masonry. A skim is a thin finishing coat, a few millimetres thick, applied over sound plaster or plasterboard to leave a smooth surface ready for paint.

Thicker 15mm boards are used in tested systems for separating walls, loft conversions, garages, stair enclosures and places where extra fire, sound or impact performance is needed. You must read your quote carefully if your building control officer has asked for upgraded fire resistance. A 15mm standard board is not automatically equivalent to a tested 15mm fire rated or acoustic board. You can read more about the specific fire rules to understand when standard board is not enough.

How much a sheet weighs

The thickness of the board dictates how much it weighs. A heavier board is more work for the plasterer to fit.

For a standard 2400mm by 1200mm sheet, a 9.5mm board weighs about 17kg to 20kg. A 12.5mm board weighs about 22kg to 25kg. A 15mm board weighs about 27kg to 30kg.

A 12.5mm sheet of about 22kg to 25kg is heavy work to fit on a ceiling, and a 15mm sheet of about 27kg to 30kg is heavier still. That is one reason why heavier boards cost more in labour on a ceiling and why ceiling work is usually priced separately from walls.

What a sheet of plasterboard costs

When you look at a quote for boarding and skimming, the materials line will include the cost of the raw plasterboard. These are general UK allowances and actual prices vary by region, brand and order size.

The table below shows typical published prices for a standard 2400mm by 1200mm sheet.

Board

Typical use

Typical 2026 price per sheet

9.5mm

Selected ceilings and curved work

£8 to £12

12.5mm

Most domestic walls and ceilings

£10 to £15

15mm

Tested systems needing extra performance

£13 to £20

These figures represent typical published prices for 2026, and local quotes will differ. They show the cost of the board alone from a merchant. They do not include the screws, the adhesive, the jointing tape, the plaster to skim it, or the labour to carry it into your house and fix it to the wall.

What specialist boards cost

Standard plasterboard is perfect for a dry living room or bedroom. Kitchens, bathrooms and busy hallways often require a board with different properties. These specialist boards cost more than standard wallboard.

The table below shows typical published prices for a 12.5mm specialist board in a standard 2400mm by 1200mm sheet.

Board

Typical 2026 price per sheet

Moisture resistant

£15 to £23

Acoustic

£16 to £28

Impact resistant

£20 to £35

These are typical published prices for 2026, and local quotes will differ. Moisture resistant, acoustic and impact resistant boards are made for damp rooms, noise control and knocks. You can read more about what these do in the guide to the different plasterboard types for domestic work.

What boarding costs fitted

Plasterers price per job after seeing it. They base their prices on the area in square metres, the state of the background, ceiling height and access. London and the South East cost more.

Quotes will present costs in two different ways. A supply and fix price includes both the tradesperson's time and the materials they supply. A labour only price covers just their time, meaning you or a main builder must buy and supply the plasterboard, adhesive and screws.

Here are typical guide figures for 2026 showing fitted prices per square metre.

  • Dot-and-dab to masonry: £12 to £22 per square metre, labour only (board and adhesive extra). Dot and dab means sticking plasterboard directly to blockwork using dabs of adhesive.
  • Dry lining to masonry using metal studs: £20 to £40 per square metre, supply and fix.
  • Ceiling boards only: £15 to £30 per square metre, supply and fix.
  • Skim on board: £8 to £15 per square metre, labour only.
  • Full room tape and joint: £35 to £65 per square metre, supply and fix including materials. Tape and jointing covers just the seams between the boards rather than skimming the whole surface.

A full replaster means hacking off failed plaster and applying a backing coat plus a finish coat, or fixing new plasterboard and skimming it. This takes much longer than boarding a bare new extension. A Which? survey of its Trusted Traders, carried out in November 2025, gives typical costs for full room plastering. This includes removing old plaster, dry lining, skimming and finishing. The figures exclude VAT but include labour and materials.

A small room takes two to three days and costs £650 to £2,500. A medium room takes three to four days and costs £750 to £3,200. A large room takes four to five days and costs £900 to £4,400.

If your renovation involves the outside of your house as well as plasterboarding the inside, you will see different pricing structures. External render comes as sand and cement, lime, pebbledash, monocouche and thin-coat acrylic or silicone systems. Render is priced per square metre, but the scaffolding required to reach the upper floors is often a completely separate line on the quote.

How board appears on a plasterer's quote

A quote is a fixed price, while an estimate is just a rough guess. Citizens Advice suggests you get written quotes from at least three traders before you agree to any work.

A reliable written quote will list exactly what the tradesperson plans to do. It should include a fixed total price rather than a daily rate. It must show a breakdown of all the work to be done and the materials needed, with separate costs for each material and part of the work. The document should also state how long the price is valid for, whether the price includes VAT, and when the price can go up.

When you compare your quotes, check which thickness and board type is specified for each wall and ceiling. Check whether the price is supply and fix or labour only. A quote that looks unusually cheap may leave out the materials or the final skim coat, so check what each includes.

Look for the preparation work. Stripping wallpaper, removing loose plaster and sealing painted surfaces take time. If a plasterer skips the preparation and skims over loose, damp or unsealed painted surfaces, the new coat will crack or peel.

Check who pays for waste removal. A trader who carries waste must be a registered waste carrier, and the register is public. Quotes should clearly state if a skip is included or if you are expected to dispose of the old plaster and offcuts.

If your ceiling has an old textured coating, you must be careful. The Health and Safety Executive says textured coatings such as Artex may contain asbestos in any building built or refurbished before 2000. Work on them does not normally need a licensed contractor but must be done by people trained to work safely with asbestos. You should not sand, scrape or drill suspect coatings and you should tell tradespeople about them before work starts. Dry sanding or scraping Artex is highly dangerous.

If you are stripping external walls back to the brickwork and fixing new plasterboard, you might trigger building regulations. Where 25 per cent or more of an external wall is re-rendered, re-plastered or re-lined internally, the regulations normally apply and the wall's insulation would normally have to be improved. Your tradesperson should explain how they plan to meet these rules before they price the job.

If your home is older, it might have lath and plaster walls. This is a traditional finish made from lime plaster applied over timber laths. Conservation bodies advise repairing original lime plaster where possible and replacing like for like. Putting modern gypsum or cement on old lime walls is a common mistake, so ask your plasterer how they plan to treat them.

You must also consider planning rules for older properties. Listed buildings need formal consent for any significant work, inside or out. For exterior work in England, the Planning Portal states that rendering needs no permission if materials are of similar appearance to the existing house. However, it does need permission in conservation areas, National Parks, Areas of Outstanding Natural Beauty and the Broads. If you live elsewhere or are unsure, you should check with your local council.

Common questions

Is 9.5mm plasterboard thick enough for walls?

For domestic walls, 12.5mm standard board is the usual choice and the baseline for general internal walls. The thinner 9.5mm board is mostly kept for selected ceilings, overboarding existing ceilings and curved work.

What does board and skim mean?

Board and skim is a method of replastering. It involves fixing new sheets of plasterboard to the timber joists or masonry, then applying a thin finishing coat of wet plaster over the top.

Do plasterers charge a minimum fee for small boarding jobs?

Yes, small jobs carry a minimum charge. Even a small area takes time to travel to, set up and clear up, which is why a minimum charge can apply.

Why do quotes for boarding and skimming vary so much?

Quotes differ because plasterers price per job after seeing it. They factor in the state of the background, ceiling height and access. A room that needs old wallpaper stripped and failed plaster hacked off will cost far more than putting board on a bare stud wall. Prices also rise in London and the South East.

What to do next

Before you agree to a contract, you need to know exactly what you are paying for and how to judge the tradesperson. Plastering is not a licensed trade. There is no legal register for plasterers like the one for gas engineers, so evidence of past work matters. A CSCS card is for construction sites, not proof of quality on domestic work. You can look for members of FIS, which is the trade body for the finishes and interiors sector, or tradespeople registered with TrustMark, the government-endorsed quality scheme.

Under the Consumer Rights Act 2015, work must be done with reasonable care and skill. If it is not, you can ask for it to be put right or seek a partial or full refund.

Follow this checklist when you are ready to hire.

  • Ask for a written quote from at least three different plasterers.
  • Check which board thickness and type is specified for every wall and ceiling.
  • Confirm whether the price includes materials, waste removal and floor protection.
  • Ask for a written contract and pay deposits of no more than 25 per cent.
  • Pay by card for extra protection and check if you can cancel within 14 days of agreeing the contract.

Never accept cash-only deals with nothing in writing, as this leaves you with no proof of what was agreed if the finish is poor. Before you hand over the final payment, check the finish in natural daylight. The skim coat should be perfectly smooth with no wavy lines, trowel marks or visible joints where the boards meet. Take your time to compare the preparation details on each quote, ask questions about anything that is missing, and find a plasterer near you who can explain exactly how they plan to tackle your walls.

Find a top rated plasterer near you

1,036 plasterers across the UK, each ranked on their Google rating and the number of reviews behind it. Start with your county:

All counties and towns · The UK Top 100 plasterers

Jake Morrison
Written by
Jake Morrison Editor

Jake researches and writes guides for Top Rated Plasterers, turning prices, rules and official guidance into plain advice for homeowners. He is doing up a Victorian terrace one room at a time.

Looking for a trusted plasterer? Browse our verified listings.

Find a Plasterer