Maintenance

What Causes Blown Plaster and How Is It Repaired?

What blown plaster is, how to spot it, the common causes from damp to poor preparation, when a patch is enough and when the whole wall needs replastering, with 2026 repair costs.

Illustration of a wall with a bulging patch of plaster and fallen pieces on the floor beside a trowel and bucket

Blown plaster is a surface finish that has lost its bond with the wall behind it. You will often hear a hollow sound when you tap the wall or see a visible bulge in the surface. You must find and fix the cause before you repair the wall. If you simply plaster over a blown patch without solving the underlying issue, the new finish will eventually fail too.

A plasterer uses a tapping test to check the condition of the background and see whether the finish has separated from the wall behind it. Hollow-sounding plaster is an indication that an area has failed.

The damage is not always obvious to the eye. You should look for these common signs of failure:

  • Hollow-sounding plaster when tapped
  • An area that is bulging outwards from the wall
  • Several raised patches across the surface
  • Cracks appearing around the edge of a loose area
  • Bubbling, flaking or powdery plaster
  • Damp stains or white salts on the surface

If ceilings are cracking or plaster is falling, this is an immediate safety hazard. You should send anyone with bulging ceilings or falling plaster to a plasterer straight away. Do not stand underneath a sagging ceiling or attempt to prop it up yourself.

The usual causes of blown plaster

Plaster fails for several reasons, and diagnosing the exact trigger is the first step in any successful repair. Damp and water ingress are a major cause of blown plaster. A plasterer cannot judge how far it has spread until they have seen the wall.

Water often gets in through failed external finishes. External render comes as sand and cement, lime, pebbledash, monocouche and thin-coat acrylic or silicone systems. People sometimes use K Rend as a loose term for silicone render, though it is just one manufacturer's brand name. A damaged outside layer is one possible route for water, which is why the cause needs investigating.

There are several other common causes of blown plaster:

  • Poor surface preparation before the plaster was applied
  • Incorrect application
  • Age and deterioration of the materials
  • Structural movement and settlement in the building
  • Impact or vibration
  • Freeze-thaw cycles expanding trapped water
  • Unsuitable paints or coverings such as oil-based paint and vinyl wallpaper

Why damp investigations always come first

You must always address the root cause of the damage before you start repairing the wall. Replastering the area before correcting the cause will lead to repeat failures. The new finish will simply blow again if the wall remains wet or structurally unsound.

If you suspect moisture is to blame, a damp investigation by a suitable specialist comes first. This professional will check for rising damp, penetrating damp, leaking pipes or broken gutters. Once they find the source of the water ingress, they can recommend the right fix.

In damp cases, drying delays are impossible to predict, so do not rush into a repair. Your damp specialist and plasterer should agree when the wall is ready for new finishes. You can read more about replastering after damp and salts to understand how moisture affects new finishes.

Dealing with old lime plaster in historic homes

Many older houses feature lath and plaster ceilings and lime plaster walls. Lath and plaster is traditional lime plaster pushed onto thin timber laths. This material behaves very differently to modern gypsum plaster and requires a careful approach.

The Society for the Protection of Ancient Buildings advises that old plasterwork is worth conserving wherever possible. Deterioration frequently looks worse than it is and repair rather than replacement is commonly possible. You should always address underlying structural or damp problems first.

If the lime plaster has lost its key but remains intact, repair rather than replacement is commonly possible. Loose plaster can be reattached, for example with stainless steel screws and washers or grout injection. Using modern gypsum or cement on old lime walls is a common mistake. If your home is a listed building, you need consent for any significant work inside or out, and conservation bodies advise replacing materials like for like.

Should you patch the wall or replaster it?

The scale of the damage dictates the repair method. Small patches are the simplest repair. Larger or extensive damage may need the whole wall or ceiling repaired.

A replaster means hacking off the failed plaster and applying a new backing coat plus a finish coat. Alternatively, the plasterer might fix new plasterboard and skim it, which is known as board and skim. Dot and dab is another method where plasterboard is stuck directly to the masonry on dabs of adhesive.

If an old ceiling is blown, taking it down creates a lot of dust and heavy waste, so ask the plasterer whether it needs to come down. Overboarding is one alternative. This involves fixing new plasterboard directly under the old ceiling before skimming the new boards.

If you are taking the plaster back to the brickwork, you must consider building regulations. Where 25 per cent or more of an external wall is re-plastered or re-lined internally, the regulations normally apply. In these cases, the wall's insulation would normally have to be improved during the work.

What a professional plaster repair involves

Doing the work yourself is limited to small, isolated patches where the cause is fixed. Large or widespread hollow areas are best left to a professional plasterer. Applying a smooth, flat finish takes years of practice, and a poor repair will leave a wavy finish you will see every day once it is painted.

A professional repair follows a set process. First, the loose plaster is removed back to a solid edge. The tradesperson will chip away the blown material until they reach plaster that is firmly attached to the wall. The background is then prepared to control suction and provide a key for the new material.

The new plaster is built up in layers to sit flush with the surrounding wall. The final stage is a skim, which is a thin finishing coat, a few millimetres thick, applied over sound plaster or plasterboard. The fresh plaster must dry thoroughly before you decorate.

If the repair involves ceilings with textured coatings, you must be careful. The HSE says textured coatings such as Artex may contain asbestos in any building built or refurbished before 2000. Homeowners should not sand, scrape or drill suspect coatings and should tell tradespeople about them before work starts. Dry sanding or scraping Artex can release asbestos fibres if it contains asbestos. Work on these ceilings does not normally need a licensed contractor but must be done by people trained to work safely with asbestos.

Typical repair costs in 2026

Plasterers price per job after seeing it. They calculate the cost based on the area in square metres, the state of the background, ceiling height and access. Preparation work such as stripping wallpaper, removing loose plaster, sealing painted surfaces or dealing with Artex will increase the price.

Ceilings are usually priced separately, and small jobs carry a minimum charge. Prices in London and the South East cost more than in other parts of the country.

The figures below are typical 2026 prices, and a plasterer must see the wall to quote accurately.

Type of work

Typical cost

Damp investigation

£200 to £500

Minor repairs to blown plaster

£100 to £300

Repairing a larger damaged area

£200 to £1,000

Skimming a wall after preparation

£100 to £250

Replastering a complete wall

£150 to £400

Ceiling plaster repair

£200 to £400

Waste removal (skip with permit)

£85 to £350

Redecoration per standard room

£350 to £650

These are typical 2026 prices, and local quotes will differ based on your property. You should check whether your quote includes VAT, materials, waste removal and floor protection.

How long the repair and drying take

An initial assessment takes 15 to 30 minutes for a seasoned plasterer. They will check the whole wall and work out how much material needs to come off.

Small patches are done in one to two hours for the repair and finishing stage. Larger jobs take longer, so ask the plasterer for a time estimate once they have seen the wall.

Drying before decoration takes from a few days to a couple of weeks. Fresh plaster usually takes 3 to 7 days to dry before decorating. Ask the plasterer how long to leave it, because the drying time depends on the thickness of the plaster and whether the wall is damp.

When to call a plasterer

You should ask a plasterer in when the repair is large or involves multiple areas. They have the tools and experience to cover large spaces quickly before the plaster sets. You should also call a professional if you keep repairing the same wall and the patches keep failing.

Bring a tradesperson in if water damage is present, such as from a leaking pipe or gutter. Once the plumber or roofer has fixed the leak, the plasterer can strip the damaged finish and restore the wall. You also need professional help if the wall is beyond repair and requires taking back to the brickwork. If you are unsure about the scale of the job, read about when you need a plasterer to help you decide.

Plastering is not a licensed trade. There is no legal register like the one for gas engineers, so evidence of past work matters. A CSCS card is for construction sites, not proof of quality on domestic work. FIS is the trade body for the finishes and interiors sector, and TrustMark is the government-endorsed quality scheme. Look for tradespeople who can show examples of smooth, flat walls they have finished locally.

What a quote should include and your consumer rights

A quote is a fixed price for the job, while an estimate is just a rough guess. Citizens Advice suggests getting three written quotes before you hire anyone. They also recommend getting a written contract, paying deposits of no more than 25 per cent, and paying by card for extra protection. You might be able to cancel within 14 days of agreeing a contract.

A detailed written quote protects you from unexpected costs. It should list all the preparation work, the specific areas being plastered, and whether ceilings and scaffolding are included. It should also state who is responsible for waste. A trader who carries waste must be a registered waste carrier, and the register is public.

Skimming over loose, damp or unsealed painted surfaces is a common reason jobs go wrong. The new coat simply cracks or peels off. Cash-only deals with nothing in writing leave you with no proof of what was agreed. Quotes that omit preparation, ceilings, scaffolding or waste often result in a higher final bill.

Under the Consumer Rights Act 2015, work must be done with reasonable care and skill. If the work was not done with reasonable care and skill, the customer can ask for it to be put right or seek a partial or full refund. When the job is done, you should check the finish before paying. Shine a light across the wall to check for ripples, and do not accept a wavy finish that will cast shadows once painted.

Common questions

Can you just paint over blown plaster?

Painting over the wall will not fix the underlying problem. The plaster has lost its bond with the masonry, and the loose section can continue to separate or fall.

Is hollow sounding plaster always a problem?

Hollow-sounding plaster is an indication that an area has failed, so it is worth having a plasterer look at it. If the surface is bulging or cracking, or ceiling plaster is falling, get it seen to promptly.

Will a plasterer fix the damp problem?

Plasterers specialise in wall finishes rather than plumbing or roof repairs. You normally need a damp specialist, a plumber or a roofer to find and fix the source of the water ingress before the plasterer begins their repair.

Can you plaster straight over old wallpaper?

Old coverings need to be dealt with before plastering, so ask the plasterer whether stripping wallpaper is included in the quote or priced as an extra.

Your next steps

Before you hire a tradesperson, you should assess the wall and gather the right information. Taking a methodical approach helps you get an accurate quote.

  • Note how far any bulging, cracking or flaking extends
  • Look for signs of a leaking pipe, a broken gutter or rising damp before you do anything else
  • Hire a specialist to investigate if you suspect damp is the cause
  • Ask three local plasterers to view the wall and give you a written quote
  • Check that the quotes include waste removal and floor protection

Once you have checked the wall and stopped any water ingress, you are ready to fix the damage. You can find a plasterer near you to assess the room and provide a written quote for a smooth finish.

Find a top rated plasterer near you

1,036 plasterers across the UK, each ranked on their Google rating and the number of reviews behind it. Start with your county:

All counties and towns · The UK Top 100 plasterers

Aisha Begum
Written by
Aisha Begum Writer

Aisha is a writer and editor for Top Rated Plasterers, covering plastering, rendering and repairs. When she's not writing guides, she collects vinyl records.

Looking for a trusted plasterer? Browse our verified listings.

Find a Plasterer