Small, isolated marks and hairline cracks can easily be touched up yourself with ready-made fillers and repair products. A plaster repair kit is cheap and perfectly fine for minor jobs where the wall behind the damage is completely solid. You will need to hire a plasterer when the damage is larger, covers multiple areas or has an underlying cause that a simple filler cannot fix.
What a plaster repair filler is designed to do
A plaster repair kit typically contains a ready-mixed plaster repair filler and sometimes a simple plastic spreading tool. You can find these kits in any hardware shop and they cost very little. They are meant for small marks, and the price depends on the shop, so check there.
Filler is not designed to provide structural strength or to hold a crumbling wall together. It is only meant to replace small missing sections of a skim coat. A skim is a thin finishing coat, a few millimetres thick, applied over sound plaster or plasterboard to create a smooth surface for decorating.
When the damage goes deeper than the skim coat, a simple repair filler will usually fail. In these cases you are looking at a replaster. A replaster means hacking off the failed plaster and applying a backing coat plus a finish coat. Alternatively it can mean fixing new plasterboard and skimming it, which is known in the trade as board and skim.
A thin layer of DIY filler over a deep hole or a crumbling backing coat is likely to crack and fall out. The products in a repair kit rely entirely on the strength of the material they are stuck to.
Small jobs a DIY kit can handle
A standard repair kit is the right choice for superficial damage caused by everyday wear and tear. If you have removed a picture hook and pulled away a tiny flake of the finish coat, a dab of filler is the kind of fix a kit is made for. The same applies to minor scuffs from moving furniture or small dents where a door handle has knocked the wall.
These products are also suitable for very fine hairline cracks that appear in new plaster as it settles. If the crack is a hairline and the wall around it is sound, a kit is a fair DIY job. Kits are cheap and the exact price depends on the shop you visit.
DIY repair is strictly limited to small, isolated patches where any underlying cause has already been fixed. If a plumber has repaired a pipe and left a tiny hole in an otherwise sound wall, a kit may do the job. As a hole gets larger, achieving a flat finish with a DIY product becomes harder.
You should also consider the finish you want to achieve. A small filled hole can be sanded flush with the surrounding wall relatively easily. Spreading filler over a larger area usually results in a wavy, uneven finish that will catch the light and look obvious every time you walk into the room.
Signs the problem is bigger than a patch
There is a clear line between a quick cosmetic touch-up and a job that requires a professional tradesperson. Knowing what causes blown plaster and structural cracking will help you avoid wasting time and money on fillers that will just fall out again.
- The repair is large or involves multiple areas across the same wall.
- Water damage is present or there is an active leak nearby.
- The wall is beyond repair and the plaster is crumbling to dust.
- You are repeatedly repairing the same crack or hole in the same wall.
- Ceilings are cracking or sections of ceiling plaster are falling down.
One of the most common reasons a filler fails is blown plaster. This happens when the plaster has lost its bond with the background wall. Hollow-sounding plaster is an indication that an area has failed. Large or widespread hollow areas are best left to a professional plasterer.
If you apply a repair kit to blown plaster, the filler will just stick to the loose material. Because the loose material is not attached to the wall, the whole patch will eventually crack and fall away. A plasterer will hack off the loose material back to the masonry and apply fresh backing plaster before skimming.
Sometimes you will find that a wall has been built using dot and dab. This is where rigid plasterboard is stuck directly to the masonry on thick dabs of adhesive. If this board becomes damaged or loose, a repair kit will not secure it. A plasterer should look at how the board is fixed and say what the repair needs.
Water damage and lingering damp
Water damage is a common reason for plaster to lose its bond with the wall behind it. If you have stains, peeling paint or a damp patch, a repair filler is unlikely to last. A leaking pipe or an overflowing external gutter may be the cause of the moisture.
Replastering the area before correcting the cause will lead to repeat failures. You must find the source of the water and stop it before any plastering work begins. A damp investigation by a suitable specialist comes first if you suspect damp.
Once the leak is fixed, the wall needs time to dry out. Skimming over loose, damp or unsealed painted surfaces is a common mistake that causes the new coat to crack or peel. Ask the plasterer how they will prepare a previously damp wall.
Ceilings and falling plaster
Gravity makes ceiling damage much harder to repair than a dent in a wall. If your ceiling is cracking or plaster is falling from it, you need to enlist the help of professionals. A repair kit is not designed to hold heavy ceiling plaster in place.
Overboarding is one option a plasterer may suggest for a ceiling. It involves fixing new plasterboard directly under the old ceiling and then skimming the new boards, and it typically costs £400 to £1,000. If plaster is falling, get a plasterer to look at it straight away.
You must be extremely careful with older textured ceilings. The Health and Safety Executive (HSE) states that textured decorative coatings, commonly referred to as Artex, may contain asbestos in any commercial or domestic building which was built or refurbished before the year 2000.
You must not dry sand or scrape these coatings. The HSE warns that work on materials that may contain asbestos must be done by people trained to recognise and work safely with asbestos. Householders should never try to repair or remove any suspect materials themselves and must tell tradespeople about them before any work starts.
Older walls and traditional lime plaster
Older homes were often finished with lime plaster rather than modern gypsum. In these homes you may find lath and plaster ceilings, which consist of lime plaster pressed into thin timber laths.
The Society for the Protection of Ancient Buildings (SPAB) advises that old plasterwork is worth conserving wherever possible. They note that deterioration frequently looks worse than it is and repair rather than replacement is commonly possible. Cracks can be filled and loose plaster can be reattached, but that is a job for someone familiar with lime plaster.
Applying modern gypsum or cement on old lime walls is a common error. Conservation bodies advise repairing original lime plaster where possible and replacing it like for like. A plasterer who understands traditional buildings will need to look at the wall to decide if it can be saved.
Any underlying structural or damp problems should be addressed first. Once the building is watertight and stable, a specialist can advise on patching the lime plaster with matching materials.
Exterior walls and cracked render
Plaster repair kits are generally meant for interior walls. If you have cracks or holes on the outside of your house, you are dealing with external render. External render comes in several forms, including traditional sand and cement, breathable lime, pebbledash, monocouche and thin-coat acrylic or silicone systems.
You will often hear tradespeople talk about K Rend. This is a manufacturer's brand name that is often used loosely to describe any silicone render system. Repairing external render is a different job from patching internal plaster, so ask a plasterer who does render.
If a large section of your exterior wall has blown and needs replacing, you need to be aware of building regulations. Where 25 per cent or more of an external wall is re-rendered, re-plastered or re-lined internally, the regulations normally apply. In these cases the wall's insulation would normally have to be improved at the same time.
You also need to consider planning rules. In England, rendering needs no planning permission if the materials are of a similar appearance to the existing house. However, permission is required in conservation areas, National Parks, Areas of Outstanding Natural Beauty and the Broads. Listed buildings need formal consent for any significant work, inside or out. If you live elsewhere in the UK or are unsure, you should check with your local council.
What a professional patch repair costs
Plasterers price per job after seeing the work in person. They will base their quote on the area in square metres, the state of the background, the ceiling height, how difficult the access is, and the preparation required. Preparation might include stripping wallpaper, removing loose plaster, sealing painted surfaces or dealing with old Artex.
This table shows typical costs for different types of plaster repair and preparation work.
|
Type of plastering work |
Typical estimated cost |
|---|---|
|
Small patch repair |
£100 to £300 |
|
Repairing a larger damaged area |
£200 to £1,000 |
|
Skimming a wall after preparation |
£100 to £250 |
|
Replastering a complete wall |
£150 to £400 |
|
Ceiling plaster repair |
£200 to £400 |
|
Ceiling overboarding |
£400 to £1,000 |
|
Professional damp investigation |
£200 to £500 |
These are typical 2026 prices and your local quotes will differ.
Small jobs carry a minimum charge. One 2026 figure puts it at around £120 to £150. Prices will also be higher if you live in London and the South East.
Render is usually priced per square metre, with scaffolding often listed as a separate line on the quote. Ceilings are also usually priced separately from walls.
Time required for a professional repair
How long a repair takes depends on the size of the area and its cause, so ask the plasterer for an estimate once they have seen it. You will then need to wait for the plaster to dry.
Drying times depend on how much material has been applied. Thicker coats take longer to dry, so a deep repair needs longer than a thin skim.
Ask the plasterer when the repair is ready to decorate, and do not paint over plaster that still has darker, damp patches.
Questions to ask before you book a plasterer
Plastering is not a licensed trade. There is no legal register like the one for gas engineers, so evidence of past work matters a great deal. A CSCS card is for construction sites and is not proof of quality on domestic work. TrustMark is the government-endorsed quality scheme, and FIS is the trade body for the finishes and interiors sector.
To avoid cash-only deals with nothing in writing, you should ask the following questions when gathering quotes.
- Is this a fixed quote or just an estimate? A quote is a fixed price, whereas an estimate is just a rough guess.
- Does the price include VAT and all the necessary materials?
- Have you included the cost of floor protection and cleaning up?
- Who is responsible for waste removal? A trader who carries waste must be a registered waste carrier, and the register is public.
- Does the quote include all the preparation work, such as stripping wallpaper or applying a sealing coat?
- Are the ceilings priced separately from the walls?
- If working outside, is the scaffolding included in this price or billed separately?
Under the Consumer Rights Act 2015, all work must be done with reasonable care and skill. If it is not, the customer can ask for it to be put right or seek a partial or full refund. Citizens Advice suggests getting three written quotes, having a written contract, paying deposits of no more than 25 per cent and paying by card. They also advise that you might be able to cancel within 14 days of agreeing a contract.
Common questions
Can I use a repair kit on a large crack?
A large crack can have an underlying cause, so a filler may not last. If the repair is large or involves multiple areas, or you keep repairing the same wall, call a plasterer.
Will a plasterer's patch repair be completely invisible?
A skilled plasterer will aim to blend the new plaster flush with the existing wall, but no one can promise a patch will be invisible. Once the repair is dry, ask the plasterer or decorator how to finish the paintwork, because a difference in texture can still show.
Why does my plaster repair filler keep falling out?
Filler falls out when the material it is stuck to is loose, crumbly or damp. If you apply a repair kit to blown plaster or a wall with a water leak, the filler cannot form a strong bond. Fix the underlying cause first, and call a plasterer if the area is large or loose.
Do I need to strip wallpaper before the plasterer arrives?
Ask the plasterer. Preparation such as stripping wallpaper may or may not be in the quote, so agree who does it before work begins.
Your next steps
If you are unsure whether you need skim plastering or a full replaster, taking a methodical approach will help you secure the right tradesperson for the job.
- Note whether the damage is large, bulging or in several places, and look for signs of damp.
- Check the age of your property and look out for textured ceilings that might contain asbestos.
- Decide exactly which walls and ceilings need work so you can give a clear brief.
- Gather three written quotes from local tradespeople and check they include preparation, materials and waste removal.
- Ask to see examples of their previous local work and check they have the right insurance in place.
Taking the time to check the background of your walls will help you avoid spending money on a DIY kit where the cause needs fixing first. When you are ready to get fixed quotes for your repair, you can find a plasterer near you to assess the damage and explain exactly what needs to be done.
Find a top rated plasterer near you
1,036 plasterers across the UK, each ranked on their Google rating and the number of reviews behind it. Start with your county: